Concrete cutting in Victorville CA - straight cuts with the slab scanned first
Need a doorway in a wall, a strip out of the driveway or a trench through the floor? We cut it straight and clean.
- Licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
How do I get a section of concrete cut out cleanly?
Concrete cutting in Victorville uses saws to make straight, controlled cuts in concrete that's already there. You can take a section out of a driveway, floor or sidewalk, or open a door or window in a wall, without breaking up everything around it.
Most calls start with a slab that's in the way of something new. It might be a line that has to run under the garage floor, a wider driveway, a broken section you want out without tearing up the rest, or a door where there's only wall right now. The price moves with how long and how deep the cut runs, whether there's steel inside the concrete and how easy the spot is to reach. The schedule mostly turns on getting the area scanned and on whether your job needs a permit. When I come out, you get a written price for your own job.
How we handle concrete cutting
Before a saw touches anything, we want the area scanned for cables, because what's inside a slab or wall isn't something you guess at. We also settle where the slurry will go before it can run across your yard. Slurry is the gray mix of water and cuttings that comes off a wet blade. Then we pick the saw that fits, a flat saw for a floor or driveway and a wall saw for an opening. We mark the line, make the cut, collect the slurry and clean up.
Cutting is often the first half of a bigger job. If you're widening or rebuilding a concrete driveway or adding onto a concrete patio, we can cut a clean edge where the new work meets the old slab, and then we pour the new section ourselves.
Flat sawing for driveways and floors
A walk-behind saw runs across the surface, so it suits driveways, garage floors, sidewalks and patios where a strip or section has to come out. It's the right saw any time the concrete is lying flat.
Wall sawing for doors and windows
The saw rides a rail bolted to the wall, and the rail keeps the cut straight even when it runs sideways or overhead. That's what you want for a new door or window in a concrete or masonry wall.
Concrete cutting permits and ground in Victorville
In Victorville, the city's Building Division enforces the building code whenever a building or structure is altered or repaired. Its permit list names residential flat concrete work, not cutting, so the list alone doesn't settle your cut. The city says that list isn't complete and asks you to call (760) 955-5100 about work that isn't on it. If your job needs a permit, I'll tell you at the estimate and we'll handle the application. When it's not clear, we call the city and ask before we start.
Most of the cutting we do around here is on driveways and garage floors. Usually we're opening a strip for a new line or squaring off a broken section before it's repoured, and we see the same jobs in Apple Valley and Hesperia. A lot of what we cut out sank because the subgrade, the dirt and gravel the slab sits on, was never packed. So once a section is out, I look at what's underneath before anything new goes back.
Why Victorville homeowners call Monolith Victorville Concrete for concrete cutting
I price it and I'm there
I come out to look at the job myself, and I'm on site with our crew when the cutting gets done. The person who walked your slab and wrote the price is the one watching the line go in.
Based in Victorville, working the High Desert
We're based in Victorville and work in the cities around it across the High Desert, including the ones on this site and more. You're calling a crew that already works around here, not one coming in from out of the area.
Doing flatwork since 2013
We've been in business since 2013, and we're best known for driveways, patios and flatwork, the flat concrete around a home. When we cut into a slab, we usually know how it was built and what's likely under it.
Licensed and insured on every job
We're licensed and insured. That matters when a heavy saw and a crew are working at your house.
On a cut, what matters most is knowing what's inside the concrete before the blade goes in. Send us the details and I'll come out and take a look.
Request a quoteGet a written price for your concrete cutting job
We reply within one business day. The estimate is free, I come out to your property, and there's no obligation. Once you send the form, we'll set a time for me to look at what you need cut.
What happens after you call us about concrete cutting in Victorville?
Call or send us a message
Call (760) 493-6027 or use the form, and we'll get back to you to set a time. Tell us what surface needs cutting so I know what I'm walking into.
I look at the site
I come out, look at the concrete and ask what you need the cut to do. You get a written estimate, so you know the number before anything gets cut.
We set the date and cut
Once you say go, we set the date, do the prep we talked about and make the cut. If new concrete is going in, we prep the ground, pour and finish after that.
We walk the job together
When we're done, I walk the job with you so you can see the cut and the cleanup. If something doesn't look right to you, that's the time to say so.
Frequently asked questions
How much does concrete cutting cost per foot in Victorville?
Across the US, professional concrete saw cutting usually costs about $4 to $25 per linear foot. That's a national figure, not our price. On a small job, a minimum or trip charge can weigh more than the per-foot rate, so ask for the minimum along with the per-foot price when you compare quotes. For your Victorville job, I'll come out and give you a written price.
Why do you need to scan concrete before cutting it?
A scan shows whether the slab has post-tension cables, which are steel cables held under tension inside the concrete. Cutting one can damage the structure or release that stored force near the crew. One scanning company advises a professional scan of the exact spot before any cut, which is why we want it done first.
Who do I talk to about a curb cut in Victorville?
The city's permit page sends curb cuts and driveway approaches to its Engineering Division. That matters if your cut is part of widening a driveway or adding a new one, since the approach is the part that meets the street. I'll point you to the right office at the estimate.
How do I keep dust down when cutting concrete?
Cut it wet, which is how most flat and wall sawing is done, because the water cools the blade and turns the dust into slurry. The catch is that slurry runs off. It has to be vacuumed up or contained, so the job needs a plan for collecting it before cutting starts.
What license does a concrete cutting contractor need in California?
California puts concrete sawing, breaking and coring under its D-6 Concrete-Related Services Contractor classification. When you're comparing contractors, ask how they're licensed for the cutting itself, not just for pouring.
How do I get ready for a concrete cutting job at my house?
Pull together any structural records or plans you have for the house or slab, because the scan works best when it's paired with them. Ask early who's supplying water and power. One trade group's specification for flat sawing puts that on the owner or whoever's acting for them.
Work that often follows a cut
Concrete driveway building
If the cut is making room for a wider driveway or replacing a sunken section, a new pour on a well-packed base gives it the best chance to sit level with what stays.
Concrete patio construction
When you're adding onto a slab out back or replacing a cracked patio, a clean cut line gives the new concrete a straight edge to meet, and we can pour it too.
Victorville, CA
Send us photos of what needs cutting
Call (760) 493-6027 or use the form with a few photos, the surface you need cut, roughly how many feet it runs and any structural records you have, so I can come out ready to price it.